This section provides metadata for the data reported for this indicator at the national level and at the global level.
- Goal
Goal 6: Ensure availability and sustainable management of water and sanitation for all
- Target
Target 6.4: By 2030, substantially increase water-use efficiency across all sectors and ensure sustainable withdrawals and supply of freshwater to address water scarcity and substantially reduce the number of people suffering from water scarcity
- Indicator
Indicator 6.4.1: Change in water-use efficiency over time
- Series
Water Use Efficiency (United States dollars per cubic meter)
- Related indicators
This indicator needs to be combined with the water stress indicator 6.4.2 to provide adequate follow-up of the target 6.4.
Other indicators, specifically those for Targets 1.1, 1.2, 2.1, 2.2, 5.4, 5.a, 6.1, 6.2, 6.3, 6.5 will complement the information provided by this indicator.
- Custodian agencies
Food and Agriculture Organization of the United Nations (FAO)
Field | National | Global |
---|---|---|
Organisation | Not available for this indicator |
Food and Agriculture Organization of the United Nations (FAO) |
Contact organisation unit | Not available for this indicator |
Not available for this indicator |
Contact email address | Not available for this indicator |
Not available for this indicator |
Field | National | Global |
---|---|---|
Definition and concepts | Not available for this indicator |
Definition: Change in water use efficiency over time (CWUE): The change in the ratio of the value added to the volume of water use, over time. Water Use Efficiency (WUE) is defined as the value added of a given major sector[1] divided by the volume of water used. Following the United Nations International Standard Industrial Classification of All Economic Activities ISIC 4 coding , sectors are defined as:
Concepts:
1 In order to maintain consistency with the terminology used in SEEA-Water, the terms water use and water abstraction are utilized in this text. In particular, “water abstraction” must be considered synonym of “water withdrawal, as expressed in both AQUASTAT and the statement of the SDG target 6.4. ↑ 2 In AQUASTAT, as well as in the World Bank databank and in other national and international datasets, the MIMEC sector is referred to as “Industry”. Also, SEEA-Water uses the term “industrial use” of water. ↑ |
Unit of measure | Not available for this indicator |
The unit of the indicator is expressed in Value/Volume, commonly USD/m3. |
Classifications | Not available for this indicator |
System of Environmental-Economic Accounting for Water (SEEA-water) SEEA-water is used to define the concept of “water use” in the context of this indicator, and to describe the water flows among users. International Standard Industrial Classification of All Economic Activities, revision 4 ISIC-4 is used as the standard for the definition of the economic sectors. |
Field | National | Global |
---|---|---|
Data sources | Not available for this indicator |
Data needed for the calculation of the indicator are administrative data collected at country level by the relevant institutions, either technical (for water and irrigation) or economic (for value added). Official counterparts at country level are the national statistics offices and/or the line Ministry for water resources and irrigation. More specifically, FAO requests countries to nominate a National Correspondent to act as the focal point for the data collection and communication. Data are mainly published within national statistical yearbooks, national water resources and irrigation master plans, and other reports (such as those from projects, international surveys or results and publications from national and international research centres). |
Data collection method | Not available for this indicator |
Data collection is done through FAO's global information system on water and agriculture (AQUASTAT) and the AQUASTAT questionnaire on water and agriculture. The data collection process relies on a network of National Correspondents, officially nominated by their respective countries, in charge of the provision of official national data to AQUASTAT. As of August 2020, 150 countries have nominated national correspondents, as well as alternate correspondents from different agencies. Countries submit data through the annual AQUASTAT questionnaire on water and agriculture, which contains- among others - the information required for the calculation of SDG indicator 6.4.1. Regarding the economic indicators Gross Value Added (GVA), FAO uses UNSD database and aggregates it following the revision 4 ISIC-4 is used as the standard for the definition of the economic sectors. |
Data collection calendar | Not available for this indicator |
Data are collected every year through the AQUASTAT network of National Correspondents. FAO has dispatched the questionnaires to the National Correspondents in July 2021. |
Data release calendar | Not available for this indicator |
Data are released every year, usually in February following the UNSD collection schedule. |
Data providers | Not available for this indicator |
Data come from governmental sources. Data providers are different depending on the country. In many cases data collection at country level is coordinated by the National Statistics Office (NSO). Data not generated by a country is displayed with an appropriate qualifier. |
Data compilers | Not available for this indicator |
Calculation rules are predefined and use data referring to the same year to generate aggregate values. |
Institutional mandate | Not available for this indicator |
FAO has a mandate to “collect, analyse, interpret and disseminate information relating to nutrition, food and agriculture”. (FAO Constitution, Article 1) |
Field | National | Global |
---|---|---|
Rationale | Not available for this indicator |
The rationale behind this indicator consists in providing information on the efficiency of the economic and social usage of water resources, i.e., value added generated by the use of water in the main sectors of the economy, and distribution network losses. The distribution efficiency of water systems is implicit within the calculations and could be made explicit if needed and where data are available. This indicator addresses specifically the target component “substantially increase water-use efficiency across all sectors”, by measuring the output per unit of water from productive uses of water as well as losses in municipal water use. It does not aim at giving an exhaustive picture of the water utilization in a country. Other indicators, specifically those for Targets 1.1, 1.2, 2.1, 2.2, 5.4, 5.a, 6.1, 6.2, 6.3, 6.5 will complement the information provided by this indicator. In particular, the indicator needs to be combined with the water stress indicator 6.4.2 to provide adequate follow-up of the target 6.4. Together, the three sectoral efficiencies provide a measure of overall water efficiency in a country. The indicator provides incentives to improve water use efficiency through all sectors, highlighting those sectors where water use efficiency is lagging behind. The interpretation of the indicator would be enhanced by the utilization of supplementary indicators to be used at country level. Particularly important in this sense would be the indicator on efficiency of water for energy and the indicator on the efficiency of the municipality distribution networks. |
Comments and limitations | Not available for this indicator |
The corrective coefficient, Cr, for the agricultural sector is needed in order to focus the indicator on the irrigated production. This is done for two main reasons:
|
Method of computation | Not available for this indicator |
Computation Method: Water use efficiency is computed as the sum of the three sectors listed above, weighted according to the proportion of water used by each sector over the total use. In formula: Where: WUE = Water use efficiency Awe = Irrigated agriculture water use efficiency [USD/m3] Mwe = MIMEC water use efficiency [USD/m3] Swe = Services water use efficiency [USD/m3] PA = Proportion of water used by the agricultural sector over the total use PM = Proportion of water used by the MIMEC sector over the total use PS = Proportion of water used by the service sector over the total use The computing of each sector is described below. Water use efficiency in irrigated agriculture is calculated as the agricultural value added per agricultural water use, expressed in USD/m3. In formula: Where: Awe = Irrigated agriculture water use efficiency [USD/m3] GVAa = Gross value added by agriculture (excluding river and marine fisheries and forestry) [USD] Cr = Proportion of agricultural GVA produced by rainfed agriculture Va = Volume of water used by the agricultural sector (including irrigation, livestock and aquaculture) [m3] The volume of water used by the agricultural sectors (V) is collected at country level through national records and reported in questionnaires, in units of m3/year (see example in AQUASTAT http://www.fao.org/nr/water/aquastat/sets/aq-5yr-quest_eng.xls). Agricultural value added in national currency is obtained from national statistics, converted to USD and deflated to the baseline year. Cr can be calculated from the proportion of irrigated land on the total Arable land and Permanent crops (hereinafter “cultivated land”, as follows: Where: Ai = proportion of irrigated land on the total cultivated land, in decimals 0.563 = generic default ratio between rainfed and irrigated yields More detailed estimations are however possible and encouraged at country level. Water efficiency of the MIMEC sectors (including power production): MIMEC value added per unit of water used for the MIMEC sector, expressed in USD/m3. In formula: Where: Mwe = Industrial water use efficiency [USD/m3] GVAm = Gross value added by MIMEC (including energy) [USD] Vm = Volume of water used by MIMEC (including energy) [m3] MIMEC water use (Vm) is collected at country level through national records and reported in questionnaires, in units of m3/year (see example in AQUASTAT http://www.fao.org/nr/water/aquastat/sets/aq-5yr-quest_eng.xls). MIMEC value added is obtained from national statistics, deflated to the baseline year. Services water supply efficiency is calculated as the service sector value added (ISIC 36-39 and ISIC 45-98) divided by water used for distribution by the water collection, treatment and supply industry (ISIC 36), expressed in USD/m3. In formula: Where: Swe = Services water use efficiency [USD/m3] GVAs = Gross value added by services [USD] Vs = Volume of water used by the service sector [m3] Data on volumes of used and distributed water are collected at country level from the municipal supply utilities records and reported in questionnaires, in units of km3/year or million m3/year (see example in AQUASTAT http://www.fao.org/nr/water/aquastat/sets/aq-5yr-quest_eng.xls). Services value added is obtained from national statistics, deflated to the baseline year. Change in water use efficiency (CWUE) is computed as the ratio of water use efficiency (WUE) in time t minus water use efficiency in time t-1, divided by water use efficiency in time t-1 and multiplied by 100: It must be noted that computing the indicator in an aggregated manner, i.e. total GDP over total water use, would lead to an overestimation of the indicator. That is due to the fact that, for the agricultural sector, only the value produced under irrigation has to be counted in calculating the indicator. Hence, the sum of the value added of the various sectors used in these formulas is not equivalent to the total GDP of the country. |
Adjustments | Not available for this indicator |
Since national level data is frequently tailored to be useful at national level and not for international comparisons, data may be manipulated in order to maximize international comparability. Adjusted data is displayed with an appropriate qualifier. Data is rounded according to a specific methodology http://www.fao.org/aquastat/en/databases/maindatabase/metadata/ Additionally, the Statistical Working System (SWS) has the correspondence among different international codes (FAOSTAT, UNSDM49, ISO2, ISO3) for geographic areas and is used to convert area codes in the external sources to UNSDM49 codes which is the standard used in the SWS. |
Treatment of missing values (i) at country level and (ii) at regional level | Not available for this indicator |
• At country level If scattered data (over time) are available, linear interpolation method takes place if there are at least two non-missing values in the time series. If not, the only possible way to impute it is through the carry-forward. Imputed data is displayed with an appropriate qualifier. • At regional and global levels If country data are missing, the value of the indicator will be considered in the average of the others in the same region. Imputed data is displayed with an appropriate qualifier. |
Regional aggregations | Not available for this indicator |
The aggregation for global and regional estimations is done by summing up the values of the various parameters constituting the elements of the formula, i.e. value added by sector and water use by sector. The aggregated indicator is then calculated by applying the formula with those aggregated data, as if it were a single country. An Excel sheet with the calculations exists, and can be shared with the IAEG if required. |
Methods and guidance available to countries for the compilation of the data at the national level | Not available for this indicator |
|
Quality management | Not available for this indicator |
|
Quality assurance | Not available for this indicator |
FAO is responsible for the quality of the internal statistical processes used to compile the published datasets. The FAO Statistics Quality Assurance Framework (SQAF), available at: http://www.fao.org/docrep/019/i3664e/i3664e.pdf provides the necessary principles, guidelines, and tools to carry out quality assessments. FAO is performing an internal bi-annual survey (FAO Quality Assessment and Planning Survey) designed to gather information on all of FAO’s statistical activities, notably to assess the extent to which quality standards are being implemented with a view to increasing compliance with the quality dimensions of SQAF, documenting best practices and prepare quality improvement plans, where necessary. Domain-specific quality assurance activities are carried out systematically (e.g. quality reviews, self-assessments, compliance monitoring). |
Quality assessment | Not available for this indicator |
Overall evaluation of data quality is based on standard quality criteria and follows FAO’s SQAF. It also includes:
|
National | Global |
---|---|
Not available for this indicator |
Data availability: The data needed for the indicator are collected through AQUASTAT and other databases (FAOSTAT, UNSD) for 168 countries worldwide Time series: 1961-2019 (Discontinuous depending on the country. Data are interpolated to create timelines). Disaggregation: The indicator covers all the economic sectors according to the ISIC classification, providing the means for more detailed analysis of the water use efficiency for national planning and decision-making. Although the subdivision into three major aggregated economic sectors is sufficient for the purpose of compiling the indicator, wherever possible it is advisable to further disaggregate the indicator, according to the following criteria:
These levels of disaggregation, or a combination of those, will give further insight on the dynamics of water use efficiency, providing information for remedial policies and actions. Data are vertically interpolated in the presence of missing values to allow for a time series analysis. |
National | Global |
---|---|
Not available for this indicator |
Geographical: Regional differences, especially in relation to irrigated agriculture and different climatic conditions (including variability) are to be considered in the interpretation of this indicator, especially in countries with substantial amounts of available water resources. Also for this reason, coupling this indicator with water stress (6.4.2) is important for the interpretation of the data. Over-time: time series are comparable across time. |